A lot of people have already been poisoned with singed vodka. Therefore, many are interested in how to dilute alcohol with water to obtain a homemade alcoholic drink 40 g. This procedure is actually not complicated at all. Knowing certain technologies, at home you can get vodka at 40 degrees, more "strong" or "weaker" - at will.
It is necessary
- - alcohol;
- - water;
- - a container for breeding;
- - softener and activated carbon.
Instructions
Step 1
So, how to dilute alcohol with water at home to obtain a solution of a certain strength? First, prepare your own alcohol and water. It is believed that exceptionally soft spring water is suitable for making vodka. But as a last resort, you can also use the tap. Only it should first be filtered or at least defended for a day.
Step 2
Take a water container. Calculate the amount required to prepare a solution of the desired strength. To do this, use the formula M = SV / Z-V, where M is the required amount of water, S is the strength of your alcohol, K is the required strength of vodka, V is the initial volume of alcohol.
Step 3
Of course, in most cases, people are interested in how to dilute alcohol with water up to 40 degrees. To do this, simply add 700 ml of water to 500 ml of 96% alcohol. This amount is easily determined by the above formula: M = 96 * 500 / 40-500 = 700.
Step 4
Pour the calculated amount of water into the prepared container. Now let's see how to dilute the alcohol.
Step 5
Pour all the alcohol into another container (use a large enough one). Pour water into rubbing alcohol. It is believed that in order for the reaction to proceed correctly in the future, it is necessary to pour a denser liquid into a less dense one. But you can do the other way around - pour alcohol into water. There won't be much of a difference in what follows.
Step 6
Leave the solution to reach readiness for at least a couple of days, or better for a week. This is necessary so that all chemical reactions occurring in it are completed. Settle the liquid in the refrigerator in a sealed container.
Step 7
Clean the resulting solution. This should be done without fail. In principle, the answer to the question of how to dilute alcohol with water is not difficult. However, what we prepared in the first steps is called sorting and is not yet suitable for use. Activated carbon can be used to clean the solution. For one liter of sorting, you need about 30 tablets.
Step 8
Add about 1 tsp of sugar per liter to the vodka. In this way, you will soften this alcoholic drink and make it a little more pleasant to the taste. If desired, you can substitute glucose or fructose for sugar. That's all. Now you know how to dilute alcohol with water yourself. As you can see, if you know the formula, this is a relatively simple matter.
Step 9
Bottle the vodka or store it in the same container it was used in. Remember that uncontrolled alcohol consumption can be very harmful to your health.
